OC1 Speedway Cleaner 5l
€59.00
Out of stock
SKU
A175/005
Effective cleaning solution for speedway motorcycles
Speedway Cleaner is a professional speedway motorcycle cleaner that effectively removes dirt and oil in minutes. The nanotechnology-based formula breaks down contamination without brushing, protecting paintwork and delicate surfaces. Used by competitors at speedway tracks across Europe — safe for all motorcycle parts.
- Effective on oil
- Ready to use
- Quick cleaning
- Safe for all parts
Cleaning solution designed for speedway
Speedway motorcycles are exceptional machines that operate in extreme conditions — mud, oily gravel, high temperatures and oil are everyday realities on the track. Speedway Cleaner is a motorcycle cleaning solution created specifically for these challenges. You don't need to be a mechanic to restore your speedway bike to showroom condition after every race. A few minutes, water and this cleaner are all it takes.
A regularly cleaned motorcycle isn't just about aesthetics. It means longer component life, better performance and the ability to quickly spot potential technical issues. Dirt and oil deposits act as an abrasive — the longer they remain on the motorcycle, the more damage they can cause. Speedway Cleaner tackles this problem quickly and safely.
Key properties
What sets Speedway Cleaner apart from other cleaning products on the market? Above all, a formula created specifically with the unique demands of speedway motorcycles in mind.
- Nanotechnology – the innovative formula works at a microscopic level, penetrating deep into contamination, so there's no need for scrubbing.
- Ready to use – requires no dilution or special preparation, so you don't need to worry about proportions and the formula always performs optimally.
- Effective on oil – the special formula handles oil stains brilliantly, an unavoidable element of the speedway environment.
- No brushing required – simply spray, wait a few minutes and rinse with water, saving time and preventing mechanical damage.
- Economical efficiency – the 5 l capacity provides approximately 50 full motorcycle washes, making it an excellent choice for racing teams.
Who is Speedway Cleaner for?
Speedway Cleaner has been created for everyone involved with speedway motorcycles.
If you're a speedway rider — competing in leagues, amateur races or training sessions, this motorcycle cleaner will save you time in the paddock. Quick cleaning between races keeps your machine in optimal condition without wasting time on tedious scrubbing.
If you run a speedway motorcycle service centre — the large 5 l capacity is an economical solution for workshops handling multiple machines. Its effectiveness and safety for all parts mean you can use one product to clean the entire motorcycle. If you're a team mechanic — you know the value of quick and effective cleaning between race rounds. Speedway Cleaner works rapidly, allowing efficient work within limited time.
When to use Speedway Cleaner?
- After races and training – when the motorcycle is covered in mud, gravel and oil, quick cleaning straight after riding prevents contamination from drying on.
- Before races – a clean motorcycle isn't just about presentation; it also allows thorough inspection of the machine's technical condition before the start.
- During servicing – a clean motorcycle makes maintenance and repair work considerably easier, and faults, leaks or damage are simpler to spot.
- For seasonal storage – before putting your motorcycle away for winter, thorough cleaning helps prevent corrosion and damage from accumulated contamination.
- During pre-race checks – a clean engine and chassis allow quick detection of potential technical issues, leaks or loose components.
Trusted by professionals
Speedway Cleaner is a product from OC1, which has been the official technical partner of the Motocross World Championship (MXGP) for three years. The best teams choose OC1 products because they know that in motorsport, every detail counts — including cleanliness and technical condition of the machine.
Speedway Cleaner has been tested in the toughest track conditions by European speedway competitors such as Martin Vaculik, Max Fricke and Fredrik Lindgren. Riders appreciate the speed, effectiveness and safety for all motorcycle components. If it works in the paddock during competitions, it will work in your garage too.
| EAN | 4262353190135 |
|---|---|
| Application | Motorcycle, Speedway |
| Purpose | Cleaning |
| Suitable for | Plastic, Fairings, Helmet, Visor, Chain, Brakes, Tyres, Rubber, Rims, Metal parts |
| Key Features | Nanotechnology that breaks down dirt, brush-free cleaning system, effective on oil, safe for all motorcycle parts, ready to use without dilution |
| Benefits | Effectively removes mud, dirt and oil contamination, safe for carbon fibre, anodised metal, rubber and plastic, does not damage seals, hoses and brake discs, saves time with brush-free system |
| What problem does it solve? | Difficult and time-consuming speedway bike cleaning, removing stubborn oil stains, protecting paintwork from scratches during washing, extending component life through regular cleaning, detecting technical issues |
| Context of use | Speedway races, speedway training sessions, motorcycle servicing, preparing for sale, seasonal storage, pre-race checks, regular maintenance |
| Formula | Ready to use / does not require dilution |
| Product Form | Liquid |
| Capacity | 5 l |
| Efficiency | Approximately 50 washes per vehicle |
| Application Temperature | Apply at temperatures between 5°C and 25°C, Do not apply to hot surfaces |
| Storage Temperature | Store at temperatures between 5°C and 30°C |
| Weight (kg) | 5.300000 |
| Made in | Germany |
1. Motorcycle preparation
Before applying the cleaner, wet the motorcycle surface with water. This step is optional but helps distribute the product evenly and increases its effectiveness on heavily soiled areas.
2. Product application
Apply Speedway Cleaner directly to the dirty surfaces. You can use a spray bottle, foam cannon or apply with a sponge. Ensure all soiled areas are covered, paying particular attention to spots with heavy dirt and oil buildup.
3. Dwell time
Wait 3–5 minutes to allow the cleaner to work and dissolve contamination. During this time, nanotechnology penetrates dirt at a microscopic level, breaking down even stubborn oil stains. Do not let the product dry on the surface — on hot days, reduce waiting time or work in a shaded area.
4. Stubborn dirt removal (optional)
If you encounter particularly stubborn contamination, use a soft brush or sponge to gently remove it. Do not scrub hard — the product does most of the work for you.
5. Rinsing
Thoroughly rinse the motorcycle with clean water, removing all cleaner residue along with loosened dirt. You can use a garden hose or pressure washer (set at low pressure to avoid damaging seals and bearings).
6. Drying
Dry the motorcycle with a microfibre cloth or allow it to air dry naturally. Wiping the surface prevents water marks and mineral deposits.
Important
-
Do not apply the product to hot or heated surfaces
-
Avoid direct contact with eyes and skin — in case of contact, rinse with plenty of water
-
Store at 5–25°C, away from heat sources and direct sunlight
-
Keep out of reach of children
-
Do not use in enclosed spaces without adequate ventilation
Tip
For best results, clean your motorcycle regularly after every race or training session. Fresh contamination is far easier to remove than dried-on dirt. Regular cleaning extends the life of paintwork and components, and makes it easier to spot potential technical issues. One 5 l container provides approximately 50 washes — nearly an entire season of regular cleaning!
Is Speedway Cleaner safe for carbon fibre and anodised metal surfaces?
Yes, Speedway Cleaner is safe to use on all parts and surfaces, including carbon fibre, anodised metal, rubber and plastic. The formula has been developed with delicate materials used in speedway motorcycles in mind and causes no damage or discolouration.
Can Speedway Cleaner be used on off-road vehicles other than speedway bikes?
Yes, this motorcycle cleaner is suitable for cleaning other off-road vehicles such as enduro bikes, quads, motocross bikes and MTB bicycles. Its universal formula effectively tackles mud, gravel and oil regardless of vehicle type.
How long should I leave Speedway Cleaner on the motorcycle before rinsing?
We recommend leaving Speedway Cleaner on the motorcycle for 3–5 minutes before rinsing. This allows the nanotechnology to penetrate dirt and break it down effectively. On hot days or in direct sunlight, reduce this time to prevent the product from drying on the surface.
Can I use a brush or sponge to remove stubborn dirt?
Yes, for particularly dirty areas you can use a soft brush or sponge to gently remove dirt. However, thanks to the nanotechnology, rinsing with water alone is usually sufficient — the product does most of the work for you, protecting paintwork from scratches.
Does Speedway Cleaner damage brake discs and pads?
No, Speedway Cleaner can be safely used on brake discs and pads. It will not cause any harm to the braking system. However, we recommend rinsing and drying brake discs thoroughly before the first ride.
How much Speedway Cleaner do I get in one container and how many washes will it last?
Speedway Cleaner comes in a 5 l container, providing enough cleaner for approximately 50 full speedway motorcycle washes. The exact number depends on how dirty the motorcycle is and the application method used.
Can Speedway Cleaner be applied using a foam cannon?
Yes, Speedway Cleaner can be applied using a foam cannon for a more efficient and thorough cleaning process. The foam adheres better to surfaces and works longer on contamination, increasing cleaning effectiveness.
Does Speedway Cleaner leave a protective layer on the surface?
Speedway Cleaner applies a thin layer of special corrosion inhibitors, providing basic protection against future corrosion. For comprehensive protection, we recommend using OC1 Polish&Protect after cleaning, which creates a long-lasting hydrophobic protective coating.
Can Speedway Cleaner remove built-up brake dust and oil stains?
Yes, Speedway Cleaner effectively removes built-up brake dust, oil, dirt, stains and light corrosion marks without damaging delicate surfaces. The nanotechnology-based formula penetrates deep into contamination, breaking down even stubborn oil stains typical of the speedway environment.
Do I need to dilute Speedway Cleaner before use?
No, Speedway Cleaner is ready to use and requires no dilution. Simply apply it directly to dirty surfaces, wait a few minutes and rinse with water. This saves time and ensures the proportions are always perfect for optimal performance.
How often should I clean my speedway motorcycle with Speedway Cleaner?
We recommend cleaning your speedway motorcycle after every race or training session. Regular cleaning prevents the buildup of contamination that can damage paintwork and components. Fresh dirt is also much easier to remove than dried-on grime. Regular maintenance extends motorcycle life and makes it easier to spot potential technical issues.
At what temperature should I store Speedway Cleaner?
Speedway Cleaner should be stored at 5–25°C, away from heat sources and direct sunlight. Do not allow the product to freeze. Proper storage conditions ensure full product effectiveness over time.
Related Products
We found other products you might like!