OC1 Tires & Plastic Shine 450ml
€19.00
In stock
SKU
A150/450
Pearl effect. Dust won't stick.
Your tires and plastic elements will come back to life in moments. Tires&Plastic Shine is a professional tire and plastic polish for motorcycles and bicycles — it protects against fading, slows down re-soiling and creates a pearl hydrophobic effect. Thanks to antistatic properties dust won't stick to surfaces. Easy to use — just spray and wipe. Used by professionals, made for anyone who wants their vehicle to look like new.
- Pearl effect
- Antistatic properties
- Restores color
- UV protection
- Leaves no streaks
Long-lasting protection and fresh look without effort
Faded tires and plastic fairings are not just an aesthetic problem. Loss of color and shine is the first signal that materials are losing their protective properties. UV radiation, road salt, moisture and chemicals gradually destroy the surface of rubber and plastic, shortening their lifespan by up to half. Tires&Plastic Shine is more than just an ordinary polish — it's professional protection that not only restores appearance, but actually protects surfaces against further degradation.
Used by service teams in motorcycle competitions, but created for anyone who wants to keep their vehicle in great condition without monthly service visits. Just 5 minutes is enough for tires and plastics to look like new — no scrubbing, no complicated application techniques, no greasy residue that attracts dirt.
Main properties of Tires&Plastic Shine
What sets Tires&Plastic Shine apart from dozens of similar products on the market? Above all, technology that combines effectiveness with ease of use. This is not another greasy product that shines for an hour, then turns your tires into a dust magnet.
- Hydrophobic coating with pearl effect – creates an invisible barrier that makes water roll off in droplets like from a lotus leaf.
- Antistatic properties – unlike popular silicone sprays, this tire polish doesn't attract dust like a magnet.
- Color refreshing – faded elements regain color intensity without a cheap, artificial shine effect.
- UV filter – every sun exposure causes microscopic damage to rubber and plastic structure, and Tires&Plastic Shine creates a protective layer.
- Colorless formula – leaves no white residue on dark surfaces or dark marks on light elements.
Who is this tire and plastic polish for?
You don't need to be a mechanic to care for your vehicle like a professional. Tires&Plastic Shine was created for everyone who wants their motorcycle or bicycle to look great without spending a fortune on regular service visits. Off-road and enduro motorcycle owners will appreciate that after every muddy ride, tires and plastic fairings receive not just cleaning, but above all protection.
Road and MTB cycling enthusiasts know that tires, front forks and plastic guards are constantly exposed to dust, mud and moisture — regular protection extends component lifespan by up to 30–50%. Those who value aesthetics and detailing will find in this polish a way to achieve a "showroom look" effect in just minutes, when a motorcycle or bicycle is not just a means of transport, but a source of pride.
Professional use in competitions
Tires&Plastic Shine is not a product created in a marketing laboratory — it's a tool used by professional mechanics and service teams at MXGP racing tracks. Why do professionals choose this motorcycle tire polish?
- Speed of action – in racing service, seconds count. A rider returns from practice with a muddy motorcycle, and in an hour must head out for qualifying. Full cleaning and protection of the entire vehicle takes maximum 10 minutes.
- Resistance to racing conditions – mud thrown from competitors' wheels, contact with hot tires after several laps — all this places enormous demands on protective products. The wash-resistant formula ensures protection survives the entire race without losing properties.
- Aesthetics for sponsors and media – in professional motorcycle racing, equipment appearance is a matter of team and sponsor image. Motorcycles in the paddock must look perfect for TV cameras and photographers. The same tool used by professionals is now available to every motorsport enthusiast.
Innovative formula without side effects
What exactly makes Tires&Plastic Shine work better than greasy products available in every supermarket? It's a well-thought-out composition of ingredients that mutually enhance their effects. The colorless optical formula — unlike products containing black pigments — works at the material structure level, filling microscopic irregularities and scratches.
The product has a low viscosity coefficient and water-like consistency, so after drying it creates a thin, almost invisible protective layer instead of a greasy film. The formula provides corrosion protection for metals and is safe for all surfaces, including unpainted aluminum, chrome and steel.
| EAN | 4262353190098 |
|---|---|
| Application | Motorcycle, Motocross, Enduro, Speedway, Road, Quad, Bicycle, Trial, MTB |
| Purpose | Protection |
| Suitable for | Plastic, Fairings, Tyres, Rubber, Rims |
| Key Features | Creates a hydrophobic coating with a pearl effect, antistatic properties repelling dust, restores color and depth, protects against UV radiation, leaves no greasy residue, safe for all exterior materials, long-lasting effect |
| Benefits | Restores intense color of faded elements, protects against further UV and weather damage, makes future cleaning easier with hydrophobic coating, extends tire and plastic lifespan by up to 30-50% |
| What problem does it solve? | Eliminates color fading of tires and plastics caused by UV radiation, prevents rubber drying and cracking, protects against premature material aging, simplifies future cleaning with antistatic coating, saves replacement costs |
| Context of use | Regular care after washing, preparation before show or vehicle sale, protection before winter storage season, maintenance after riding in extreme conditions (mud, salt, UV), professional detailing in service centers and workshops |
| Application Form | Atomizer |
| Formula | Ready to use / does not require dilution |
| Product Form | Liquid |
| Capacity | 450 ml |
| Efficiency | Approximately 25-30 full applications for a complete motorcycle, approximately 30-35 applications for a bicycle |
| Application Temperature | Apply at temperatures between 5°C and 25°C, Do not apply to hot surfaces |
| Storage Temperature | Store at temperatures between 5°C and 30°C |
| Weight (kg) | 0.600000 |
| Made in | Germany |
1. Surface preparation
Start with thorough washing of tires and plastic elements. Use a cleaning agent (ideally OC1 Offroad Cleaner or Motorcycle Cleaner) to remove dirt, road dust, old product residue and oil contamination. Rinse thoroughly with water and leave to dry completely. Extremely important: apply the product only on dry surfaces — moisture will prevent proper bonding of active ingredients with the material.
2. Shaking the bottle
Before each use, shake the bottle vigorously for 5-10 seconds. Active ingredients may partially settle at the bottom during storage, and shaking ensures even consistency and maximum product effectiveness. If the bottle has been standing for more than a month, shake it twice with a 10-second break between attempts.
3. Product application
Spray the surface from a distance of approximately 15-20 cm. Don't overdo the amount — a thin layer works better than a thick one. For one motorcycle tire, 3-4 sprays are enough, for a plastic fairing 2-3. If you see dripping drops, that's a sign you've used too much product. Work section by section — first the front wheel, then the rear, then plastics. This way you have control over the process and won't forget any element.
4. Spreading and polishing
Immediately after spraying, spread the product with a clean microfiber cloth using even, circular motions. Active ingredients begin bonding with the surface within seconds, so don't delay. Polish until you achieve an even, semi-matte shine. You don't need to reach a perfect gleam — the product will do its job during drying. In hard-to-reach places (tire tread, plastic crevices) use a smaller cloth or applicator sponge.
5. Drying time
Leave the vehicle to dry for approximately 10-15 minutes at room temperature. Don't expose it to rain immediately or start riding — the ingredients need time to fully bond with the surface. After drying, you can gently wipe the surface with a clean, dry cloth to remove any excess product and achieve the final effect.
Important
Application temperature — never apply the product on hot surfaces (after riding, in summer sun). Optimal temperature is 15-25°C. On colder days (below 10°C) the product may dry longer — extend drying time to 20-25 minutes.
Avoid contact with brakes — although the product is safe for most surfaces, it should not contact the working surface of brake discs and pads. If you accidentally sprayed the discs, immediately wipe them with a clean cloth soaked in brake cleaner (e.g. OC1 Brake Cleaner).
Storage — keep the bottle at 5-25°C, away from direct sunlight. After use, tighten the sprayer to prevent product drying. Do not freeze — after thawing the product may lose its properties.
Clothing protection — although the product doesn't leave permanent stains, it may leave greasy marks on light clothing. Work in gloves or wash your hands thoroughly after application.
Tip
Application frequency — for optimal protection, apply the product every 3-4 weeks or after each thorough vehicle wash. If you ride intensively in difficult conditions (mud, road salt), shorten this interval to 2-3 weeks. Regularity is key — better to apply often and thin than rarely and thick.
Pro tip for maximum effect — if you want to achieve a "wet look" effect instead of semi-matte finish, apply a thin second layer of product 2-3 minutes after the first application. The second layer will increase shine intensity and additionally strengthen hydrophobic protection. Remember however that such effect will be more prone to dust settling.
Professional technique for tires — to achieve absolutely even effect on tires, professionals use a small applicator sponge instead of a cloth. Soak the sponge with product and apply it in circular motions along the tread. This way the product evenly penetrates all grooves and crevices of the tire.
Can Tires&Plastic Shine be used on all types of plastic?
Yes, the product is safe for all types of plastics used in motorcycles and bicycles — polycarbonate, ABS, polypropylene, vinyl, polyethylene and fiberglass. You can apply it on painted and unpainted fairings, guards, mudguards, fenders, and even on helmets (external surfaces only, not the visor!). Also safe for carbon surfaces and anodized aluminum. It doesn't cause discoloration, cracking or dulling of transparent elements.
How long does the protective effect last after one application?
Under normal usage conditions, the protective effect lasts 3-4 weeks, surviving 2-3 vehicle washes. If you ride mainly in dry conditions, on asphalt or paved roads, protection can last up to 6 weeks. In extreme conditions (frequent mud riding, regular pressure washing, intense summer sun exposure) the effect may shorten to 2-3 weeks. The hydrophobic coating gradually weakens but doesn't disappear suddenly — you'll notice water stops beading as intensely, which signals time for reapplication.
Does the product leave greasy marks on plastic elements?
No — this is one of the main advantages of Tires&Plastic Shine compared to competing products. The formula has a low viscosity coefficient and after drying creates a thin, almost invisible protective layer without a greasy effect. Plastics won't be slippery to touch, and dirt and dust won't stick to them like with popular silicone tire sprays. After proper application and drying, surfaces are dry and pleasant to touch, with a natural, semi-matte shine.
Is Tires&Plastic Shine safe for aluminum rims and painted elements?
Yes, the product is completely safe for aluminum rims (both unpainted and lacquered), painted plastics, chrome elements and all painted surfaces. It contains no solvents or acids that could damage paint or cause metal corrosion. You can apply it on the entire wheel including the rim without worrying about discoloration or dulling. Only avoid contact with the working surface of brake discs — although the product doesn't harm metal, it may temporarily reduce braking effectiveness until worn off.
Do I need to dilute Tires&Plastic Shine before use?
No, Tires&Plastic Shine is a ready-to-use product and requires no dilution. Apply it directly from the bottle with sprayer, exactly as it is. Diluting with water or other substances will destroy its protective properties and chemical balance of ingredients. If the product seems too thick or too watery, that's a sign it wasn't shaken enough before use — active ingredients may have partially settled. Vigorous shaking of the bottle will restore proper consistency.
How often should the product be applied for optimal protection?
For standard users, we recommend application every 3-4 weeks or after each thorough vehicle wash. If you ride intensively in difficult off-road conditions (mud, sand, water), shorten to 2-3 weeks. For vehicles used occasionally (weekend rides, seasonal use) application every 4-6 weeks is sufficient. The key indicator is observing the water beading effect — when you notice water
Related Products
We found other products you might like!
